What Are Glycol Chiller Systems?

Across the UK, glycol chiller systems support industries that rely on accurate temperature regulation. From breweries and dairies to laboratories and manufacturing plants, these systems provide stable and controlled cooling using a glycol-water mixture as the heat transfer medium.

Unlike standard water chillers, glycol chillers use a glycol-based solution that lowers the freezing point of the circulating fluid. This makes them suitable for processes requiring sub-zero temperatures and environments subject to low ambient conditions.

At a fundamental level, glycol chiller systems remove heat from a process and transfer it away through a refrigeration circuit. The cooled glycol solution is then circulated to the load, where it collects process heat and returns to repeat the cycle.

How a Glycol Chiller System Works

Effective system design ensures consistent output and reduced energy consumption. Core components typically include:

• Refrigeration compressor


• Condenser


• Evaporator heat exchanger


• Metering device


• Glycol reservoir and pump


• Control panel

Within the evaporator, the refrigeration cycle extracts thermal energy from the secondary fluid. The chilled solution is then distributed to the application, where it absorbs heat before returning.

A typical glycol chiller system diagram shows two distinct circuits. The refrigeration loop manages heat removal, while the glycol loop transfers chilled fluid to the point of use. Accurate schematics are valuable for commissioning and diagnostics.

Glycol Chiller System Control Panel

The glycol chiller system control panel acts as the operational centre of the system. Modern panels typically include:

• Digital temperature controllers


• Integrated logic controllers


• Pressure protection cut-outs


• Circulation pump management


• Fault indication systems


• Remote monitoring capabilities

The control panel regulates compressor operation, maintains setpoint temperatures and monitors system pressures. Many systems also log performance data to support preventative maintenance and compliance documentation.

In facilities requiring precise cooling, reliable control minimises fluctuations that might compromise process stability.

Installing a Glycol Chiller System Control Panel

Proper glycol chiller system control panel installation is essential for consistent performance and regulatory compliance. Key factors include:

• Electrical compliance – The panel should be installed in accordance with UK standards, with correct breaker sizing and safe isolation points.


• Location and ventilation – Installation should avoid damp conditions and excessive ambient temperatures.


• System validation – Post-installation checks must include sensor accuracy, alarm testing and pump sequencing confirmation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Key Factors in System Design

Effective glycol chiller system design begins with detailed analysis of process requirements. Engineers evaluate:

• Required temperature range


• Flow rate and pipe sizing


• Ambient environmental conditions


• System resilience planning


• Allowance for capacity growth

Oversized systems increase energy consumption, while undersized units struggle to maintain setpoints. Load calculations must consider peak demand and operational cycles.

Fluid selection also plays a role. Propylene glycol is commonly used in food and beverage settings due to its lower toxicity, whereas ethylene glycol may be selected for industrial environments requiring improved heat transfer efficiency.

Additional considerations such as insulation standards, pump capacity and exchanger design influence stability, efficiency and lifespan.

Where Glycol Cooling Is Used

Glycol chiller systems support numerous sectors across the UK, including:

• Breweries and distilleries


• Food manufacturing plants


• Pharmaceutical production environments


• Laser and medical equipment cooling


• Manufacturing and moulding operations


• Cold storage and preparation areas

For example, in beverage production, chillers regulate process temperatures and stabilise product storage. In manufacturing settings, they prevent overheating during continuous machinery operation.

Protecting System Performance

Routine maintenance supports consistent output and equipment longevity. Typical servicing tasks include:

• Checking glycol concentration levels


• Assessing circulation components


• Removing debris from heat rejection surfaces


• Verifying control panel settings


• Confirming correct refrigeration performance

Over time, glycol can degrade or become contaminated, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Common Queries About Glycol Chiller Systems

What glycol concentration should be used?

The required percentage depends on freeze protection and operating temperature, commonly ranging from 20–40%.

Can a glycol chiller be installed outdoors?

Outdoor installation is possible when the system is designed for external conditions.

How does a glycol chiller differ from a water chiller?

Unlike water-only systems, glycol-based chillers resist freezing and support sub-zero applications.

Is remote access available?

Many contemporary glycol chiller system control panels integrate with BMS platforms or secure remote systems.

What is the recommended testing frequency?

Fluid condition should be reviewed regularly based on system workload.

Which industries benefit most from glycol chillers?

Industries requiring stable and low-temperature control frequently depend on glycol-based systems.

Final Considerations

Glycol chiller systems deliver dependable cooling performance across a broad range of industrial and commercial applications. From careful glycol chiller system design to compliant control panel installation and structured maintenance, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, working with experienced specialists ensures compliance with UK standards and operational requirements. For technical advice and tailored solutions, consult the Newsome glycol chillers page to explore engineered glycol cooling solutions designed for long-term performance.